Manual De Usuario Simplicity Impresora 1694498 [18/20 Páginas]

Simplicity impresora 1694498

Normal Removal &

Installation

NORMAL REMOVAL & INSTALLATION

Removing the Grass Catcher

1. Disconnect the tubes (A, Figure 9) from the turbo and

remove them from the catcher.

2. Remove the hair pin clip (B, Figure 9) and clevis pin

(D) securing the cover (E). Disconnect the cable

(see Figure 8). Remove the cover (E).

3. Remove and empty the bags (C, Figure 9).

4. Warning: Back plate (A) will fall when rod (D) is

removed. Remove the hair pin (B, Figure 10) and

rod (D) while holding back plate (A).

5. Lift back plate & support assembly (A, Figure 10) off

hitch plate (D)

WARNING

OPERATION WITHOUT TURBO & CATCHER

For operation without turbo, the mower deflector

MUST be properly installed in the down position

and retained by the spring latch (See Turbo

Operator’s Manual).

Figure 9. Normal Removal & Installation

A. Tubes

B. Hair Pin Clip

C. Bags

D. Clevis Pin

E. Cover

F. Clip

Figure 10. Install Back Plate

A. Back Plate & Support C. Hitch Plate

B. Hair Pin D. Rod