Miele parrilla de cocina CS 1312 Manual

Manuales PDF
48 Páginas Español

Miele parrilla de cocina CS 1312
To avoid the risk of damaging the
barbecue grill fit the wall units and
extractor hood before installing it.
~
The veneer or laminate coatings of
worktops (or adjacent kitchen units)
must be treated with 100 °C
heat-resistant adhesive which will not
dissolve or distort.
Any backmoulds must be of
heat-resistant material.
~
This appliance must not be used in
a non-stationary location (e.g. on a
ship).
~
The barbecue grill must not be
installed directly next to a
salamander (CS 1421). It is essential to
maintain a distance of at least 150 mm
between these two appliances.
~
After installing the grill, ensure that
the connection cable is without
hindrance and that there is no
mechanical obstruction which could
damage it, e.g. when draining the
appliance.
~
Ensure that the electrical cable is
installed in such a way that it does not
touch any parts of the appliance which
become hot. The cable will be
damaged by extreme heat.
~
Observe carefully the safety
distances given on the following pages.
~
Do not use any sealant except
where expressly instructed to do so.
The seal underneath the appliance
provides a sufficient seal for the
worktop.
All dimensions in this instruction booklet
are given in mm.
Safety instructions for installation
29
Manuales Relacionados para Miele parrilla de cocina CS 1312