Manual De Usuario Cisco Systems Tarjeta De Red 1010 [1/12 Páginas]

Cisco Systems Tarjeta de red 1010

CHAPTER

Cabling and Configuring the CES Port Adapter Modules 8-1

Cabling and Configuring the

CES Port Adapter Modules

This chapter describes cabling and conﬁguration procedures for the LightStream 1010

asynchronous transfer mode (ATM) switch circuit emulation service (CES) T1 and E1 port

adapter modules (PAMs). When your switch leaves the factory, it is conﬁgured as speciﬁed

in your order and is ready for installation and startup. As your communication requirements

change, you might want to upgrade your system, add components, or change the initial

conﬁguration.

The following CES T1 and E1 PAMs are described in this chapter:

• CES T1 Twisted-pair Port Adapter Module

• CES E1 Twisted-pair Port Adapter Module

• CES E1 BNC Port Adapter Module

Software and upgrades require speciﬁc document part numbers and other frequently

updated information; therefore, only basic software conﬁguration guidelines are included

in this publication. Detailed, up-to-date instructions are included in the LightStream 1010

ATM Switch Software Conﬁguration Guide and command line interface (CLI) command

descriptions are provided in the LightStream 1010 ATM Switch Command Reference.

This chapter contains the following information:

• Overview of the CES Port Adapter Modules

• Connecting the Interface Cables and Checking the LEDs

• Conﬁguring the Interfaces